If Fluke Connect Desktop is installed on the computer navigate to either:ģ2 Bit PC: C:\Program Files\Fluke\Fluke Connect\TIRNDIS\W7Ħ4 Bit PC: C:\Program Files (x86)\Fluke\Fluke Connect\TIRNDIS\W7 If SmartView is installed on the computer navigate to either:ģ2 Bit PC: C:\Program Files\Fluke\SmartView 4.3\TIRNDIS\W7Ħ4 Bit PC: C:\Program Files (x86)\Fluke\SmartView 4.3\TIRNDIS\W7 The Update Driver window opens select Browse my computer for drivers. To update the driver Once the device has been located in Device Manager, right click on the device name and select Update Driver Below example is showing it under the Port (Com & LPT) directory. If the driver does not install automatically, It may be labeled as Unknown Device or in the Ports (COM & LPT) section as USB Serial Port (COM). If the driver is installed correctly the device will appear in the Network Adapters section with RNDIS in the device name. To install thermal imaging camera drivers:Ĭonnect the thermal imaging camera to the computer with the USB cable. You must have system admin rights on the computer to complete the following steps. If Fluke Connect or SmartView does not recognize the thermal imaging camera after it has been connected to the computer via USB cable, then the camera drivers need to be manually installed on the computer. You need to install either Fluke Connect Desktop software or Smartview software before installing the RNDIS USB driver manually. The purpose of this article is to show step by step instructions on how to manually install the USB driver for the Fluke Thermal Imaging camera’s.
0 kommentar(er)
